I'd be amazed if it's not fuel lines. It's not impulse if it's doing the same thing with a different carb. Did it start doing it all of a sudden?
The Husqvarna thread
- Thread starter Czed
- Start date
Who was that, with the impulse full of rtv? I remember it happening
exSW, the consumate professional himself
Sure
post up your bank account and social security numbers.
Ah yes, I remember now.
I work on that series all the time the fuel and pulse line's go bad often
And it's tough to check them they are routed under the carb.
The easiest way to get to everything is to take the half wrap off and remove the fuel tank/throttle rod assembly
I'd replace everything fuel, vent and purge bulb line's
The 12.00 Amazon carbs all worked great
That 455 is still here he didn't want to pay
The 75.00 to fix it.
I would not give $75 for a running one. Fuck those saws.
I work on that series all the time the fuel and pulse line's go bad often
And it's tough to check them they are routed under the carb.
The easiest way to get to everything is to take the half wrap off and remove the fuel tank/throttle rod assembly
I'd replace everything fuel, vent and purge bulb line's
The 12.00 Amazon carbs all worked great
That 455 is still here he didn't want to pay
The 75.00 to fix it.
Thanks for the advice
I work on that series all the time the fuel and pulse line's go bad often
And it's tough to check them they are routed under the carb.
The easiest way to get to everything is to take the half wrap off and remove the fuel tank/throttle rod assembly
I'd replace everything fuel, vent and purge bulb line's
The 12.00 Amazon carbs all worked great
That 455 is still here he didn't want to pay
The 75.00 to fix it.
So we should send you all of our saws to you to fix?
I hate any of the homeowner husky's
but make some money fixing them
Local shops are 125.00 an hour for diagnostics and repairs on any saws now.
If i don't have time to work on something and they need a saw
I told several guy's just to get the china zenoah clones for 75.00 or so
I gave this one to my brother it runs very good for just a base gasket delete,muffler mod and timing advance.
I sold one of these 58cc saws about 8 years ago it's still running.
I'd fix the lawnmower first..🤣
I work on that series all the time the fuel and pulse line's go bad often
And it's tough to check them they are routed under the carb.
The easiest way to get to everything is to take the half wrap off and remove the fuel tank/throttle rod assembly
I'd replace everything fuel, vent and purge bulb line's
The 12.00 Amazon carbs all worked great
That 455 is still here he didn't want to pay
The 75.00 to fix it.
The 5 series pro saws I've worked on was just as big of a pain in the ass to work on, 592 included. 592 is never going to be a saw of mine. Total garbage from what I've seen of and ran the 4 we have / had. 395 is the real deal for that class saw, husky fucked up big time
My love for Husqvarna ended with the 371,372,394,395s
I really can't get into the modern Husqvarnas
I mow 1 out of 6 acres that's enough for me
And bastard kills rabbits out of the field.
72cc Holzfforma® G272 Gasoline Chain Saw Power Head With Genuine Walbro Carburetor and Ignition Coil Without Guide Bar and Chain By Farmertec All Parts Are For HUSQ 61 268 272 XP Chainsaw from China manufacturer - Farmertec
72cc Holzfforma® G272 Gasoline Chain Saw Power Head With Genuine Walbro Carburetor and Ignition Coil Without Guide Bar and Chain By Farmertec All Parts Are For HUSQ 61 268 272 XP Chainsaw offered by China manufacturer Farmertec. Buy 72cc Holzfforma® G272 Gasoline Chain Saw Power Head With...
97.48 for 2 24" and 1 28" bar/chain combo's
234.52 for 1 24" stihl light bar and chain at my local stihl dealer.
234.52 for 1 24" stihl light bar and chain at my local stihl dealer.
I looked at bars at the Stihl dealer one day and I think they wanted 70 bucks for a 16" laminated bar. I hope it's still hanging there. I didn't even look at the chains97.48 for 2 24" and 1 28" bar/chain combo's
234.52 for 1 24" stihl light bar and chain at my local stihl dealer.