I've not seen that but JJ probably knows
The Husqvarna thread
- Thread starter Czed
- Start date
BUMP
That's a new one for me. Now I need to dig thru my stash of 181-288 parts.
Maaayyybbbbeee the same FW was used on the 181SE and 61/161. IIRC, the 61/161/266 have the coil on the oposite side of the FW compared to the 181-288 (and the 268/272).
One's on the oil tank side while the other is near the fuel cap. I is at werk right now (break time) and can't look things up.
Sounds legit.
There's the likely source fer the correct answer.
Buncha dumb bastards! You use the other key way when you turn the blade upside down. Duh!
Thought was to put the chain on backwards for the Swedish stump dancers.
I have several and have worked on many 181/281/288s and have never seen one like that.
Ask spike60
Due to finding a lot of oem parts topends
Carbs, ignitions, mufflers
I ended up buying 3 holzforma g288s
176.00 shipped now one blue 2 orange
I have 2 sold if i want to sell them.
A g372xt for 156.00 shipped i have a complete xt topend and carb with intake.
And a new hyway biug bore kit
Also bought a g395 286.00 shipped
I'll have plenty of projects this winter.
Carbs, ignitions, mufflers
I ended up buying 3 holzforma g288s
176.00 shipped now one blue 2 orange
I have 2 sold if i want to sell them.
A g372xt for 156.00 shipped i have a complete xt topend and carb with intake.
And a new hyway biug bore kit
Also bought a g395 286.00 shipped
I'll have plenty of projects this winter.
I'm making a 288 lite out of one of the holzforma 288s
These traverse creek top covers are good
Only like 14.00
I have a couple of the plastic mesh flat 266/281/288 filter's on order
I'll remove the long bar mount
No need for it running a 24"
These traverse creek top covers are good
Only like 14.00
I have a couple of the plastic mesh flat 266/281/288 filter's on order
I'll remove the long bar mount
No need for it running a 24"
I don't know how many holzforma 660s 288s and 395s my logger cousin ordered
I showed him the flash sale.
He said he's getting a few of each
He's had a clone 660 for 3 years
The hired help runs it and there's never been a problem with it.
he runs his oem 394 and 395s
My friend paid me to order a 372xp and a 288 so his wife doesn't see them i guess.
So i have like 7 saws on the way to my house.
I showed him the flash sale.
He said he's getting a few of each
He's had a clone 660 for 3 years
The hired help runs it and there's never been a problem with it.
he runs his oem 394 and 395s
My friend paid me to order a 372xp and a 288 so his wife doesn't see them i guess.
So i have like 7 saws on the way to my house.
I’ve got a 268 cutoff saw, it’s getting pretty tired, would the cutoff bolt on to one of those Chink clones?
Yes i believe so
https://www.ebay.com/itm/145189169829
If you have the one like this
It was just an assembly
This is the last day of the sale.
The 272 is 89.00 so around 153.00 shipped at least to where i live.
Fuk it I went ahead and ordered a holzforma g272 it was 153.00 shipped
I had a 1.00 credit for some reason
I have a pile of oem topends and parts.
Got in my g395
G288
G288
G372xt
All of them started easy and oil good
No issues other than a ridiculous short pull rope in the 288s for some reason
I'm swapping them out for
Modern 372 handles and 4.5 trueblue rope.
Top handle is straight across like the jonnys were !🤗👍,,,cutting “ left handed” wif a Husky was awlways awkward!🤨
I took the clutches off to grease the clutch bearings
These were really on there they used some kind of loctite
You can grease them through the end of the crank
I took the clutches off to grease the clutch bearings
These were really on there they used some kind of loctite
I know but I'm out of grease for the gun i just have a tub.
I bought a oem fullwrap kit for the 395
From these guy's
https://saffordequipment.com/product/husqvarna-395-xp-wrap-kit-oem-588946201/
It had a extra set of bar plates and a extra case protector in the box.
From these guy's
https://saffordequipment.com/product/husqvarna-395-xp-wrap-kit-oem-588946201/
It had a extra set of bar plates and a extra case protector in the box.
Did you order one?
The saws i ordered that were delivered by ups took 30-35 days
The saws fed ex have are not even in the system yet
Maybe the boat sank.
Having some 066 pistons cut for popups to run in the g288s
I put a 066 piston in a oem 288 year's ago using a .080 base gasket it made for a very strong 288
I put a 066 piston in a oem 288 year's ago using a .080 base gasket it made for a very strong 288