The Husqvarna thread

[Yukon Stihl]

🎵Im’a little tea pot short and stout. Here is my handle here is my spout.🎶

Seen you refereed to as short and stout...
the tea pot is new though,is it an Xmas thing?

 

[Eccentric]

Fags

 

[BIGBADBOB]

Czed put me onto popups for 50 mm husky 266 268 etc. $20
So put one in my $50 beater 266,, runs great, no wood here in the city.
A bitch to tug over. 29 squish with bg gone Cant wait to find a log,,

 

[Czed]

Czed put me onto popups for 50 mm husky 266 268 etc. $20
So put one in my $50 beater 266,, runs great, no wood here in the city.
A bitch to tug over. 29 squish with bg gone Cant wait to find a log,,

You guy's don't have electric poles in Canada?

 

[BIGBADBOB]

You guy's don't have electric poles in Canada?

LOL
I installed hundreds.
And yes peeps do do that.
Cedar, Pine ,Yellow Cedar, larch, concrete, steel

 

[JRepairsK70e]

You guy's don't have electric poles in Canada?

Gotta be a park with sum big “ hazardous “ trees need buckin!!??🤔🙄🤷‍♂️

 

[DSS]

Czed put me onto popups for 50 mm husky 266 268 etc. $20
So put one in my $50 beater 266,, runs great, no wood here in the city.
A bitch to tug over. 29 squish with bg gone Cant wait to find a log,,

266 will do that. I got one that's only had the gasket removed, seems like it had .017 squish. Last time I checked it was over 210psi.
T1 dated a girl like that.

 

[Yukon Stihl]

266 will do that. I got one that's only had the gasket removed, seems like it had .017 squish. Last time I checked it was over 210psi.
T1 dated a girl like that.

A girl with .017 squish and 210 psi is not a girl you only want to date only once you know...

 

[roberte]

266 will do that. I got one that's only had the gasket removed, seems like it had .017 squish. Last time I checked it was over 210psi.
T1 dated a girl like that.

So hot right now

 

[Czed]

Czed put me onto popups for 50 mm husky 266 268 etc. $20
So put one in my $50 beater 266,, runs great, no wood here in the city.
A bitch to tug over. 29 squish with bg gone Cant wait to find a log,,

Drop any power poles yet?

 

[BIGBADBOB]

Drop any power poles yet?

Well the saw migrated to the cabin, good 2 ft of snow there,
Gonna have to wait for a lil thawing. Got a few rounds in the yard.
Yard has sno that got lotta rained on it an froze again, hard as a rock ATM

 

[Czed]

Well the saw migrated to the cabin, good 2 ft of snow there,
Gonna have to wait for a lil thawing. Got a few rounds in the yard.
Yard has sno that got lotta rained on it an froze again, hard as a rock ATM

I'm going to get my 266 out tomorrow
A tree snapped off and smashed the old man down the roads shed
I'll cut out the tree.

 

[Czed]

I'm going to get my 266 out tomorrow
A tree snapped off and smashed the old man down the roads shed
I'll cut out the tree.

Couldn't find the 266 did find a 268
That I had put a hyway popup in

Runs good pulls a 24" fine.

 

[Czed]

All the rubber mounts finally tore loose on this 86 266 I had stumpshot port in 2018

Still on it's original bearings and seals as far as I know

 

[BIGBADBOB]

Never seen that many bad rubbers,,, how hard ya yankin on it??

 

[Czed]

Never seen that many bad rubbers,,, how hard ya yankin on it??

Wasn't me I ran that saw a lot for 5 year's

this guy got it hung up several times and ripped on it

a lot stronger than his ms310 he said
At least his steel toed crocs were full of fresh cow shit where we were cutting.

 

[DSS]

Never seen that many bad rubbers,,, how hard ya yankin on it??

Bump

 

[DSS]

All the rubber mounts finally tore loose on this 86 266 I had stumpshot port in 2018

Still on it's original bearings and seals as far as I know

I'd be taking the 10 minutes to change the seals. Easiest saw ever.

 

[BIGBADBOB]

I'd be taking the 10 minutes to change the seals. Easiest saw ever.

I heard what you do to seals on potatoe island,,,

 

[Cbird]

Seal bacon?