Latest project

BIGBADBOB

custom user title like we had at the other place
Nov 22, 2020
1,279
11,221
113
Got a 046 tday,, needs a slug,,, meteor coming,, was lighty scored
Jug cleaned up
Its old n ugly .. ya all seen n m B4.
slug.jpg

Got a 11hp sno blower to,, couple small fixes this am, its goin to the cabin.
Electric starter is dead, got power to the starter,, no spin.
 

BIGBADBOB

custom user title like we had at the other place
Nov 22, 2020
1,279
11,221
113
So I took the starter off da blower and dissected it.
My fluke says its open in the feild.
Took a probe to the mfer,,, burried inder a connection i found where the shelac must off wore thru with vibration..
And then the wires arced and went open,,, well luck will have it there is nuff xtra wire i got in there like a ER Dr, and twisted the two wires together and soldered them and put a heat shrink tube on it,,,,, meter says 1.5 ohms and no grounds,,, I also coated the area near the arc with 5 coats of nail polish,, mfuken brushes were a real pain to get in there. My sugical skills prevailed,,,
fukker works,,,,,,

I fixed a 661 fer a guy,, we made a deal on the 046,,, and he says he has some other saws fer me to toss in,, possible 045 n 048 unknow condition.
Guys been good to me in the past, hes a faller, he just bought a 362 and may get a 500i.....as backup/brushing saws.
 

roberte

custom user title like we had at the other place
Nov 21, 2020
3,067
23,621
113
Willits
-STILL have a certain someone's 82cc Mac to rebuild.

-Got's muh 288XP that needs a tank vent fix so it stops pissing fuel whenever it's tipped on the right side.

-Got's muh 2101XP to refresh with crank seals, fuel/vent lines, and carb rebuild.

-Got's an NOS full wrap JRed 2071 to install the missing parts that a dealer cannibalized from to fix other saws while it sat on the shelf fer 20+ years.

-Got's a chinee 365 'replacement parts kit' to assemble and play wif.

-Got's a 268XP to rebuild.

-Got's several Homelite, Poulan, Mac, Husky, and Pioneer saws to rebuild or refresh.

-Got's my Massey Ferguson MF2200 backhoe to open up it's rear end, replace the broken part(s), and then refresh with MANY new hydro hoses and lines.

-Got's a mystery Bolens GT (most likely a QT16) that needs a carb rebuild and seat replacement.

-Got's The War Dept's IHC Cub Cadet 129 that needs a new seat and a replacement hydro cooling fan (old 'un is missin a blade).

Have most of the parts needed fer these various projects. BIG project is to organize/clean out the shop, install more shelves, and build more work benches so I can actually WORK ON these projects over the winter.....
Hooray super pro 81