Not So Pros v3.0

So heres some nudes, it's a 8kw generator, if I remember, the compression was the same across all three, but as you can tell 1 and 3 where not pulling there weight, at about 1/3 load it was it started acting like the fat kid at the buffet, after too much prime rib. and all of them have rust/pitting in the valves and head, #3 was the worst, cylinders look ok, worth just sending.

Got a new set of valves on the way, gunna see if I could lap the valves and send it, remember I bought this for like $200
20210404_185348.jpg
20210405_093501.jpg
20210404_185358.jpg
 
So heres some nudes, it's a 8kw generator, if I remember, the compression was the same across all three, but as you can tell 1 and 3 where not pulling there weight, at about 1/3 load it was it started acting like the fat kid at the buffet, after too much prime rib. and all of them have rust/pitting in the valves and head, #3 was the worst, cylinders look ok, worth just sending.

Got a new set of valves on the way, gunna see if I could lap the valves and send it, remember I bought this for like $200
View attachment 2211
View attachment 2212
View attachment 2213
Is that T1s server genny?